Continuous twin-shaft mixer

Continuous twin-shaft mixer

Twin-shaft mixer can be divided into concrete batch mixer and Continuous twin-shaft mixer which designed to produce mixed concrete based on proportioning by volume or weight belts.

  • Features
  • Quick Inquiry

Twin-shaft mixer can be divided into concrete batch mixer and Continuous twin-shaft mixer which designed to produce mixed concrete based on proportioning by volume or weight belts.

Continuous twin-shaft mixer producing concrete materials
Material is introduced from two or more aggregate conveyors, cement screw feeder and flow-metered water. The material is mixed as it progresses down the length of the mixer, giving a continuous stream of mixed concrete suitable for RCC (Roller Compacted Concrete), mine backfill and other less critical high-volume applications.
The XC is smaller and much more cost effective than a twin shaft mixer for an equivalent output, per hour.

Four sizes of Continuous twin-shaft mixer
The smallest size, XC 100, uses a different gearbox with direct drive; these allow the motors to be mounted at a number of different angles to suit the application. This mixer also can be supplied in clients’ drawings.
Feed of aggregates and cementitious materials by vane feeders or screw feeders is adequate for backfill applications and many RCC projects. Where verifiable proportioning with tight control on weights of material in the mix design, weigh feeders can give almost the same accuracy as batch weighing.

Continuous twin-shaft mixer is normally made of stainless steel, can be designed in different size and different colors.

Need more information?

Send us a message and a qualified representative will get back to you shortly.